Electro-Pneumatic Regulator ITV
| Series/CAD |
Port size |
Set pressure (MPa) |
ITV0000
CAD
3D CAD |
Built-in
One-touch fitting
φ4,φ5/32 |
0.001 to 0.1
0.001 to 0.5
0.001 to 0.9
-1 to -100kPa |
ITV1000
CAD
3D CAD |
1/8,1/4 |
0.005 to 0.1
0.005 to 0.5
0.005 to 0.9 |
ITV2000
CAD
3D CAD |
1/4,3/8 |
ITV3000
CAD
3D CAD |
1/4,3/8,1/2 |
| Features |
- Stepless control of air pressure in proportion to electric signals
- Sensitivity: 0.2 kPa (100 kPa specification)
- Linearity: ±1% or less (F.S.)
- Hysteresis: 0.5% or less (F.S.)
- Communication: CC-Link, DeviceNetTM, PROFIBUS DP, RS-232C
|
Electronic Vacuum Regulator ITV
| Series/CAD |
Port size |
Set pressure (MPa) |
ITV009
3D CAD |
Built-in One-touch fitting
φ4, φ5/32 |
-1 to -100 kPa |
ITV209x
CAD
3D CAD |
1/4 |
-1.3 to -80 MPa |
| Features |
- Stepless control of vacuum pressure in proportion to electric signals
- Communication: CC-Link, DeviceNetTM, PROFIBUS DP, RS-232C
|
5.0 MPa Maximum Supply Pressure High Pressure Electro-Pneumatic Regulator ITVX
| Series/CAD |
Port size |
Set pressure (MPa) |
ITVX
CAD
3D CAD |
3/8 |
0.01 to 3.0 |
| Features |
- Stepless control of air pressure proportional to an electrical signal
- Maximum supply pressure: 5.0 MPa
- Set pressure range: 0.01 to 3.0 MPa
- Maximum flow rate: 3000 L/min[ANR]
- Fluid: Air, N2, O2, Ar
- Wetted parts: Fluorine grease
|
Controller for Electro-Pneumatic Regulator IC
| Series/CAD |
Features |
| IC CAD |
- Can be mainly used integrated with the ITV0000 series without a display function.
- Converts digital input signal into analog output signal
- 10 bit parallel input signal (maximum).
· Pressure setting of 210 = 1024 points possible.
- 4 point preset output
· Applicable in the programming function with up to 20 steps.
|
Compact Proportional Solenoid Valve PVQ
| Series/CAD |
Flow control range L/min |
Fluid |
| PVQ CAD |
0 to 5
0 to 6
0 to 75
0 to 100 |
Air, inert gas |
| Features |
- Stepless control of flow rate in proportion to current.
- Repeatability: 3% or less
- Hysteresis: 10% or less
|
Electro-Pneumatic Proportional Valve VEF/VEP
| Series/CAD |
Port size |
| VEF/VEP CAD |
1/4,3/8,1/2 |
| Features |
- Stepless control of air flow or pressure by use of electric signals
- Press-die cushions
- Pressure control of welding machine and low pressure casting
Multi-stage speed control of air cylinder and rotation control of air motor
|
5 Port Electro-Pneumatic Proportional Valve VER
| Series/CAD |
Port size |
Set pressure (MPa) |
| VER2000·4000 CAD |
1/4,3/8,1/2 |
0.1 to 0.9 |
| Features |
- Stepless control of cylinder and applied pressure
- Applicable cylinder φ25 to φ125
- Available for exhaust throttle and B port pressure regulation.
|
Power Amplifier for Electro-Pneumatic Proportional Valve VEA
| Series/CAD |
Features |
| VEA250 CAD |
- Dedicated amplifier for driving an electro-pneumatic proportional valve
- Low current command signal
- High dither effect
- Stabilizing the performance of the electro-pneumatic proportional valve
|
| VEA251 CAD |
| VEA252 CAD |
E-P HYREG® VY1
| Series/CAD |
Port size |
Set pressure (MPa) |
| VY1 CAD |
M5 x 8
1/8,1/4,3/8,1/2,3/4,1,11/4,11/2,2 |
0.05 to
Supply pressure |
| Features |
- Stepless control of pressure by use of electric signals
- Thrust control of cylinder
- Flow control of nozzle
- Pressure control of tank
|
Booster Regulator VBA
| Series/CAD |
Port size |
Set pressure (MPa) |
VBA
CAD
3D CAD |
1/4,3/8,1/2 |
VBA10A: 0.2 to 2.0
VBA2xA: 0.2 to 1.0
VBA4xA: 0.2 to 1.0
VBA43A: 0.2 to 1.6 |
| Features |
- Can increase the factory air a maximum of 200 %, power supply not required.
Possible to get a maximum of double pressure by connecting air with a factory line. (VBA11A: maximum 4 times)
Space-saving type that directly connects air tanks and booster regulators.
|
Air Tank VBAT
| Series/CAD |
Port size |
Tank capacity (L) |
VBAT
CAD
3D CAD |
3/8,1/2,3/4 |
5,10,20,38 |
| Features |
- Compact air tank that can be directly connected with a regulator.
- Can be used as an independent tank.
- With a safety valve port. (Option)
|
Pressure Control Valve AP100
| Series |
Port size |
Set pressure (MPa) |
AP100
3D CAD |
1/8,1/4 |
0.05 to 0.69 MPa |
| Features |
- Releases pressure over the set range into an atmosphere and constantly
maintains the pressure in a pipe.
|
