Software and Drivers
Software and Drivers
LabVIEW Instrument Drivers
Device Drivers for Alicat flow and pressure instruments to work with LabVIEW software. (Last updated 4/12/2016. See change log.)
Don’t have LabVIEW?
Click the link below to download Alicat’s stand-alone interface for users who do not have LabVIEW.
Stand-Alone Interface Zip file (212 MB).
(Installer package containing the free LabVIEW runtime engine from National Instruments as well as the Alicat LabVIEW 2014 Standalone Application executable file.)
LabVIEW 2014 Standalone Application (version 2 .exe) Zip file (1.6 MB)
(This standalone executable is included as an example program in the main driver libraries, below.)
LabVIEW 2014
LabVIEW 2014 Driver Library (version 2) Zip file (9.1 MB), includes integrated drivers (.vi)
LabVIEW 2010
LabVIEW 2010-compatible Driver Library (version 2) Zip file (6.8 MB), includes integrated drivers (.vi)
LabVIEW 8
LabVIEW 8.0-compatible Driver Library (version 2) Zip file (7.4 MB), includes integrated drivers (.vi)
Don’t have LabVIEW?
Click the link below to download Alicat’s stand-alone interface for users who do not have LabVIEW.
Stand-Alone Interface for BASIS Units Zip file (227 MB)
LabVIEW 2014 Single-Unit Integrated Driver for BASIS Units (.exe) Zip file (450 KB)
LabVIEW 2014
LabVIEW 2014 Driver Library for BASIS Units Zip file (2.4 MB), includes integrated drivers (.vi)
LabVIEW 8
LabVIEW 8.2-compatible Driver Library for BASIS Units Zip file (1.3 MB), includes integrated drivers (.vi)
Ethernet/IP
Ethernet/IP industrial network protocol is available on Alicat flow and pressure instruments purchased with the Ethernet I/P option. Automate your flow and pressure control system through an ethernet cable. The protocol must be ordered as an installed option for new instruments, and is not available as an upgrade to existing units.
DeviceNet
Automation industry users looking for mass flow control with DeviceNet language capabilities turn to Alicat Scientific for DeviceNet-conforming instruments.
Modbus RTU
Modbus Poll configuration file for Alicat flow and pressure instruments purchased with the Modbus RTU communication protocol. This file loads the configuration requirements required to read the available data registers on any Modbus-equipped Alicat device. This is useful for troubleshooting and viewing the required Modbus data settings.
Modbus Poll Data Registers .mbp file (3 kB)
PROFIBUS
GSD file for Alicat flow and pressure instruments equipped with PROFIBUS. The latest version of the device driver is designed to work with any Alicat PROFIBUS unit. Customers using older PROFIBUS device drivers can upgrade to this device driver.
PROFIBUS GSD Zip file (13.9 kB)
USB Drivers for Alicat BB9 Boxes and Conversion Cables
Windows USB driver (setup executable): http://www.ftdichip.com/Drivers/CDM/CDM21216_Setup.exe
USB drivers for Mac, Linux and Windows CE: http://www.ftdichip.com/Drivers/VCP.htm
Device driver for legacy BB9-USB only: BB9-USB Driver (5.2 MB ZIP file)
COM Port Troubleshooter
Are you having problems communicating with your Alicat devices? Not sure which port your controller is connected to? Our COM Troubleshooter application will help you verify that your device is working properly.
This application requires the Microsoft® .NET Framework to run properly (usually preinstalled on your PC).
Download COM Port troubleshooter Zip file (3.2 kB)
Serial Terminal
Alicat’s Serial Terminal application gives you command line access to your devices. The program will allow you to read/write addresses, change set point’s and query devices.
This application requires the Microsoft® .NET Framework to run properly (usually preinstalled on your PC).
Download Serial Terminal Zip file (~200 kB)
Serial Address Dump
Alicat’s Serial Address Dump application allows you to log the register configurations for any Alicat device. You can use this to record current settings before performing a major change, or to compare current values to the initial values an instrument had when it was shipped from our factory.
This application requires the Microsoft® .NET Framework to run properly (usually preinstalled on your PC).
Download Serial Address Dump Zip file (3 kB)
Flow Vision Software Links
Alicat mass flow and pressure units come standard with Alicat’s integrated multi-drop RS-232 connectivity. (RS-485 is an available option, but not necessary to take advantage of Alicat’s multi-drop protocols.) Take advantage of this easy serial connection to your PC with the following software:
- Flow Vision SC™ software for remote monitoring and control of up to 26 Alicat units at the same time
- Flow Vision MX™ software for gas mixing with up to 6 Alicat mass flow controllers
PuTTY Settings
PuTTY is a commonly-used serial terminal program that is available for download from putty.org. Expand the tab below to configure the PuTTY settings to work properly with Alicat mass flow and pressure instruments.
PuTTY Configuration for Alicat Instruments
In the Terminal category of the PuTTY configuration window, check the box that says “Implicit LF in every CR,” and select the “Force on” radio button in the “Local echo” section. These settings make PuTTY act like a normal serial terminal, such that pressing enter will move to the next line, and both what you type and what gets returned stay on the screen.
Now, go to the Serial subcategory under the Connection category of the PuTTY configuration window. Ensure that the serial line settings appear as they do in the image below (baud: 19200, data bits: 8, stop bits: 1, no parity or flow control).
The last step is to go to the Session category in the PuTTY configuration window and select the “Serial” radio button under “Connection type.” Take care to ensure that your COM port and baud rate are correct here, and then save your new settings so they can be recalled for use easily.





