Actuators with Integrated Controllers

The EQ series of electric actuators is designed for engineers who want to transition from pneumatic cylinders to electric actuators for better repeatability or energy efficiency. Because the controller has been built directly into the actuator body, there is no need for external control cabinets. It requires only three M12 connectors and the user interface is similar to a 2-position pneumatic solenoid valve. These units feature high-performance motors with battery-less absolute encoders that retain position data without requiring a homing routine, and they offer significant environmental benefits by reducing energy consumption and CO2 emissions.

EQFS, IO-Link

The EQFS rodless slider can move loads over longer distances and with more stability than a rod-type actuator. They are typically used when a part needs to be moved between conveyor belts, lifted vertically, or positioned at multiple points during the process. Because the motor and controller are integrated and the rod doesn't extend out the end, the overall footprint is 40% smaller than a traditional motor+drive setup, making it ideal for tight spaces. It is often used in large lab automation setups, because it's rodless design is compact enough to fit inside tight diagnostic machines. It's also used in battery manufacturing to move heavy battery cells or parts between assembly stations.

EQY, IO-Link

The SMC EQY Rod Type with Integrated Controller is an ideal solution for engineers who want more precision than they can get with a pneumatic actuator, have little cabinet space, and don't always have access to a programmer. Instead of writing complex motion code, they can trigger it with simple on/off signals or use IO-Link to get data without intensive programming. The actuator provides pneumatic-like simplicity (pushing, sorting, or stopping) without the need for air lines. If there is a power outage, the battery-less absolute encoder enables the machine to remember exactly where it was so time isn't wasted homing the machine. The integrated controller is built into the motor, allowing the actuator to operate with a single power cable and a single communication cable.

EQYG, IO-Link

The EQYG guided rod is designed for automation engineers who want to transition from traditional pneumatic systems to electric actuators. It integrates the motor controller directly into the unit to eliminate external control hardware and simplify installation. The EQYG is designed to function like a pneumatic cylinder, supporting simplified movement between two end-of-stroke positions and one user-defined intermediate position through either parallel I/O or IO-Link communication. It has a battery-less absolute encoder that retains position data without homing, high-performance stepper motors that reduce energy consumption by up to 60%, and a robust guide rod block to loads that are heavy, off-center, or require high precision without twisting.

JX-T1 Teaching Pendant with Touchscreen

The JX-T1 is a modern handheld teaching pendant featuring a 4.3-inch TFT color LCD touchscreen for configuring JXC series controllers and EQ integrated-actuators. This portable device allows users to set step data, perform test runs, and monitor actuator status or alarms without the need for a laptop.

Actuators with Integrated Controllers

EQFS, IO-Link

EQY, IO-Link

EQYG, IO-Link

JX-T1 Teaching Pendant with Touchscreen

Shopping Cart

Formal Quote (0)

Contact Information

Summary